Plotting with different fill color for LD objects

Issue

      When producing presentation drawings you can use different fill color for LD objects.

Solution

      Two methods to add different color fill to objects.

        Method #1

1. Select desirable color from color list.
2. Call HATCH command, select SOLID pattern and hatch 2D part of object.
3. Select Bring to Front command from Tools>Display Order menu and select object to bring it above the hatch.

     In following example you can see how to use second method for adding different color fill to objects:

        Method #2

1. Use layers and LDOBJECTUTIL/Add solid fill command. The fill color is layer color not entity.
2. Fill Altaman fixtures with color 9 (default color). The command add "2d_FIXTURE-ldhide" layer with color 9.
3. Call Layer command. Change layer name from "2d_FIXTURE-ldhide" to "2d_FIXTURE-ldhide-Altman". Change layer color with yellow.
4. Fill ETC fixtures with color 9 (default color). The command add "2d_FIXTURE-ldhide" layer with color 9.
5. Call Layer command. Change "2d_FIXTURE-ldhide" layer name to "2d_FIXTURE-ldhide-ETC". Change layer color to blue.
6. Fill Pars fixtures with color 9 (default color). The command add "2d_FIXTURE-ldhide" layer with color 9.
7. Call Layer command. Change "2d_FIXTURE-ldhide" layer name to "2d_FIXTURE-ldhide-Pars". Change layer color to red.

        Note: For hiding lines when plotting or for adding solid fill to objects it must that 2d objects part contain region or faces.